Mastercraft USA
EvenFlow Micro Applicator Precision Floor Coating System | Pristal®
Meet the Pristal® EvenFlow Micro Applicator, the ultimate solution for professionals who demand speed, control, and consistent results when applying floor finishes, sealers, and gym coatings. This high-efficiency, gra...
$799
Fast Shipping
In Stock
· Ready to ship
1.5 Gal
TANK
16 In
HEAD WIDTH
Gravity-Fed
FLOW TYPE
3× Faster
VS MOPS
Made in USA
Industry-Leading Warranty
80+ Years in Business
Expert Support
(845) 565-8850
Pro Tip: The pivoting head allows you to work along a baseboard without stopping — tilt the head slightly into the corner and let the microfiber conform to the angle. For finish application, keep the flow rate at the lowest setting that still produces a continuous film; excess flow creates puddles that take longer to level and increases the risk of bubbling in the final coat. Shop Squeegee Blades →
EvenFlow Micro Applicator Precision Floor Coating System | Pristal®
The Pristal EvenFlow Micro Applicator is the precision tool in the EvenFlow line — designed for tight spaces, furniture-dense environments, and applications where a full-size pressurized applicator is too large or too fast. School hallways, hospital corridors, retail aisles, and gym floors with equipment in place require precise application around obstacles, under furniture, and into corners without over-applying finish or disturbing adjacent surfaces. The 1.5-gallon removable tank attaches directly to the applicator frame and pulls back off when the job is done — unused chemistry returns to the original container without waste. The gravity-fed aluminum manifold with precision flow adjustment eliminates the drips and puddles that standard mop-and-bucket application creates, resulting in even, consistent coat thickness across the entire floor area. The 16-inch pivoting microfiber head reaches under standard commercial furniture and fixtures without moving them. Made in USA. For floor care contractors and in-house facility teams, the Micro Applicator is up to three times faster than traditional damp-mopping application methods with better consistency — producing an even finish coat that levels correctly and cures without lap marks. The no-contact dispensing keeps operators away from direct chemistry exposure, which matters for programs requiring PPE compliance on extended application work.
- Gravity-fed 16-inch applicator head with aluminum manifold provides precision flow control for floor coating application
- 1.5-gallon removable tank delivers portable capacity for targeted floor finish and sealer application in defined zones
- Pivoting microfiber head assembly reaches under furniture and equipment without requiring obstacle removal
- No-contact dispensing eliminates manual application contact with floor finish, sealers, and chemical solutions
- Up to three times faster than traditional mop-and-bucket floor finish application per manufacturer performance data
- Manufactured in USA for gym coatings, hospital corridors, school hallways, retail spaces, and commercial floor maintenance
| Model | Pristal® EvenFlow Micro Applicator (SKU 625574) |
| Type | Precision Floor Coating Applicator — Gravity-Fed |
| Head Width | 16" |
| Tank Capacity | 1.5 Gallon (removable) |
| Flow Type | Gravity-Fed — aluminum manifold flow control |
| Head | Pivoting microfiber head assembly |
| Surfaces | Smooth and Textured Floors |
| Applications | Floor Finishes, Sealers, Gym Coatings, Hospital Corridors, School Hallways |
| Made In | USA |
As a general baseline: inspect all filters and consumables before each use; clean or replace as needed. Lubricate moving parts per the owner's manual schedule. Inspect power cords, hoses, and connections for wear monthly. Schedule a full service inspection annually or every 500 operating hours, whichever comes first. Refer to the specific product documentation for model-specific intervals and requirements.
Most Mastercraft® electric machines operate on standard 120V 60Hz circuits. Current draw varies by model — check the motor specifications on the product page to ensure your circuit can handle the load. For machines drawing 10 or more amps, a dedicated circuit is recommended to prevent nuisance tripping on shared circuits.
Mastercraft® maintains parts availability for all current production machines and most legacy models. Common wear items such as pads, brushes, filters, belts, and hoses are stocked on mastercraftusa.com. For less common parts or older models, contact Mastercraft® support with your model number and serial number.
Mastercraft® machines are backed by a manufacturer's warranty against defects in materials and workmanship. Warranty terms vary by product — check your product documentation for the specific coverage period. Warranty does not cover damage from misuse, improper maintenance, use of non-OEM parts, or operation outside the rated electrical specifications.
It depends on the machine. Wet/dry vacuum models are designed for liquid pickup in appropriate indoor conditions. Floor machines, burnishers, and scrubbers are designed for indoor use on stable, level surfaces. Unless the product documentation specifically states outdoor or wet environment suitability, do not use in rain, standing water, or on sloped outdoor surfaces. Contact Mastercraft® to confirm product suitability for specialty environments.
Frequently Bought Together
