PRO CHOICE
HEPA 99.97%
Mastercraft USA
HEPA Backpack Vacuum Cleaner Probe 10 | Enviromaster
Unmatched Comfort & Performance: Lightweight & Ergonomic Design: Minimizes operator fatigue during extended cleaning sessions with our hepa backpack vacuum cleaner. Powerful 1122-1188 Watt Motor: The hepa b...
$995
Fast Shipping
In Stock
· Ready to ship
1,188 W
MOTOR
100–130 CFM
AIRFLOW
10 Qt
CAPACITY
99.97%
HEPA
Made in USA
Industry-Leading Warranty
80+ Years in Business
Expert Support
(845) 565-8850
Pro Tip: Tighten the harness straps before each shift — a loose fit shifts the center of gravity and accelerates fatigue. On overhead work (ceiling grids, vents, light fixtures), tighten the shoulder straps two notches above normal ground-level settings. The Probe 10 is rated for continuous use; let the machine breathe for 10 minutes every 2 hours on maximum-load jobs. Shop Backpack Filter Bags →
HEPA Backpack Vacuum Cleaner Probe 10 | Enviromaster
The Enviromaster Probe 10 HEPA backpack vacuum is designed for environments where an upright or canister unit cannot reach — stairwells, overhead surfaces, auditorium seating, aircraft interiors, and occupied healthcare rooms where the machine must stay close to the operator and off the floor. At approximately 32 lbs fully loaded, the ergonomic harness distributes weight across the back and hips, reducing operator fatigue on extended cleaning shifts. The sealed HEPA filtration system captures 99.97% of particles down to 0.3 microns, maintaining air quality in sensitive environments — hospitals, schools, laboratories — where disturbing settled dust without containment creates compliance and liability exposure. The 1,188-watt motor delivers 100–130 CFM of airflow and 100 inches of waterlift, providing stronger suction than most comparable backpack units on the market. Made in Newburgh, NY. For janitorial operations and facility managers measuring labor efficiency, the Probe 10 increases coverage speed on complex layouts: operators move freely without repositioning a canister, cover stairs and seating sections without a cord-drag penalty, and maintain HEPA compliance throughout. Synthetic Infiltrator® filter bags are available in 10-packs for cost-effective consumable management.
- 1,188-watt motor delivers 100 to 130 CFM of airflow and 100 inches of waterlift in a hands-free backpack vacuum configuration
- Sealed critical HEPA cartridge certified at 99.97% efficiency at 0.3 microns using HOT DOP testing method
- 10-quart container with Infiltrator filter bag system maintains zero bypass filtration in a 32-pound backpack format
- OSHA 29 CFR 1926.1101 and EPA RRP compliant for asbestos, lead, and mold remediation on ladders and multi-story sites
- Backpack design enables hands-free operation on scaffolding, in transit vehicles, and in confined or overhead spaces
- Manufactured in USA and backed by Mastercraft warranty for remediation contractors and healthcare facility professionals
| Model | Enviromaster® Probe 10 (601268EM1) |
| Type | HEPA Backpack Dry Vacuum / Blower |
| Motor | 1,188 Watts, 120V |
| Waterlift | 100" |
| Airflow (CFM) | 100-130 |
| Container Capacity | 10 Quart (2.5 Gallon) |
| HEPA Filter | Sealed Critical HEPA Cartridge |
| HEPA Efficiency | 99.97% at 0.3 microns (HOT DOP method) |
| Filtration System | Dual-Mode: HEPA + Filter Bag |
| Pickup Type | Dry Only / Blower Mode |
| Weight | 32 lbs |
| Compliance | OSHA, EPA RRP, HEPA Certified |
| Applications | Mold Remediation, Lead Abatement, Asbestos, Healthcare, Transit |
| Made In | USA |
| 5 Gal Dry | 7 Gal Dry | 9 Gal Dry | 15 Gal Wet/Dry | Probe 10 ★ | |
|---|---|---|---|---|---|
| BEST FOR | Small Jobs / Offices | Mid-Size Spaces / Light Remediation | Mid-Scale Remediation | Heavy Remediation / Wet & Dry | Mobility / Multi-Story Buildings |
| MOTOR | 1.3 HP Bypass | 1.3 HP Bypass | 1.3 HP Bypass | 2 HP Bypass | 1,188W |
| CFM | 94 | 94 | 94 | 112 | 100-130 |
| WATERLIFT | 84" | 84" | 84" | 106" | 100" |
| TANK | 5 Gal Poly | 7 Gal Poly | 9 Gal Poly | 15 Gal Poly | 10 Qt Backpack |
| WET & DRY | × | × | × | ✓ | × |
| HEPA SEALED | ✓ | ✓ | ✓ | ✓ | ✓ |
| PRICE | $1,120 | $1,199 | $1,209 | $2,330 | $995 |
True HEPA. The Enviromaster® HEPA filter is individually certified at 99.97% efficiency at 0.3 microns using the HOT DOP (Dispersed Oil Particulate) testing method at 100 CFM. This is the standard required by OSHA for remediation work involving asbestos, lead dust, and mold. "HEPA-type" filters sold by other manufacturers are not tested to this standard and do not meet OSHA requirements for regulated hazardous material cleanup.
Yes. The Enviromaster® line meets OSHA 29 CFR 1926.1101 (asbestos in construction) and EPA RRP (Renovation, Repair, and Painting) requirements. The sealed critical filtration system prevents hazardous particulate from being re-released during vacuuming. Always verify state and local regulations, as some jurisdictions impose additional requirements beyond federal standards.
Filter bags (Infiltrator® Enclosed Bags) should be replaced after each project or when approximately two-thirds full — never overfill. The HEPA filter should be inspected after every 10–15 project hours and replaced when airflow drops noticeably or when physical damage is visible (tears, crushed media, compromised gasket). In high-exposure environments such as active asbestos or lead abatement, replace the HEPA filter every 30–50 operating hours. Never attempt to clean or wash a HEPA filter — doing so destroys the media and voids HEPA certification.
Bags are sized by tank capacity. The 5, 7, and 9 Gal models use the 5–9 Gal Infiltrator® Filter Bags (5-Pack). The 15 Gal Poly Wet/Dry (P41512WAF) uses the 15–20 Gal Infiltrator® Filter Bags (5-Pack). The Probe 10 Backpack uses the Backpack Filter Bags (10-Pack). All bags are available on mastercraftusa.com under Replacement Parts & Filters.
It depends on the model. The 15 Gal Poly Wet/Dry (P41512WAF) is rated for both wet and dry pickup and includes a float pan assembly that automatically shuts off suction when the tank reaches liquid capacity. The 5, 7, and 9 Gal Dry models and the Probe 10 Backpack are dry-only — using them for liquid pickup will damage the motor and void the warranty.
The sealed critical HEPA system is designed for asbestos fibers (friable and non-friable), lead dust and paint chips, mold spores, ceramic dust, aluminum dust, fiberglass, and pharmaceutical-grade fine particulate in controlled environments. Always use proper PPE and follow applicable OSHA and EPA protocols. After regulated asbestos or lead work, the vacuum and all consumables must be decontaminated or disposed of per applicable hazardous waste regulations.
Mastercraft® strongly recommends using only genuine Infiltrator® filter bags and OEM HEPA filters. Third-party consumables may not maintain the sealed critical filtration integrity required for OSHA-compliant hazardous material vacuuming. Their use may void the warranty and compromise regulatory compliance on regulated job sites.
Mastercraft® backs the Enviromaster® line with a manufacturer's warranty covering defects in materials and workmanship. Replacement HEPA filters, Infiltrator® bags, hoses, wands, and other consumables are stocked and available directly through mastercraftusa.com. For warranty claims or service inquiries, contact Mastercraft USA through the support channel listed on your invoice.
Frequently Bought Together
