PRO CHOICE
Mastercraft USA
EvenFlow Applicator Advanced 6-in-1 Floor and Surface Application System | Pristal®
Battery-powered 6-in-1 floor applicator for wax, finish, sealer and more on commercial floors. Sold as base unit — head assembly sold separately.
$3,965
Fast Shipping
In Stock
· Ready to ship
30K SF/Hr
COVERAGE
5 Gal
SPRAY TANK
5–7 Hr
BATTERY
6-in-1
MODES
Choose Your Size & Type
You're viewing
EvenFlow Applicator Advanced 6-in-1 Floor and Surface Application System | Pristal®
$3,965
EvenFlow Applicator Advanced 6-in-1 Floor and Surface Application System with 28" Head Assembly | Pristal®
$4,890
EvenFlow Applicator Advanced 6-in-1 Floor and Surface Application System with 36" Head Assembly | Pristal®
$5,125
EvenFlow Applicator Advanced 6-in-1 Floor and Surface Application System with 48" Head Assembly | Pristal®
$5,265
Made in USA
Industry-Leading Warranty
80+ Years in Business
Expert Support
(845) 565-8850
Pro Tip: Always run the 60-second self-clean cycle at the end of every shift before storing — floor finish that cures inside the pump assembly requires disassembly to clear. If switching from finish to disinfectant in the same session, run the self-clean cycle with plain water between products to prevent chemical incompatibility inside the system. Shop Squeegee Blades →
EvenFlow Applicator Advanced 6-in-1 Floor and Surface Application System | Pristal®
The Pristal EvenFlow Applicator replaces manual mop-and-bucket application of floor finish, sealers, restorers, and disinfectants with a battery-powered pressurized system that covers up to 30,000 square feet per hour — roughly 3 times the coverage rate of a professional with a finish applicator and a traditional mop. The 5-gallon spray tank draws directly from standard chemical containers, eliminating decanting waste and operator contact with undiluted chemistry. The 6-in-1 system handles floor finish application, sealer application, restorer application, disinfectant application, and surface coating in two distinct modes — selectable without tools. The 60-second self-cleaning cycle purges residual chemistry between product changes or at shift end, protecting the pump and ensuring accurate chemical metering on the next run. Battery runtime of 5–7 hours covers most commercial application schedules on a single charge. Quick-connect head widths of 28 to 48 inches are available separately. Made in USA. For facility managers and floor care contractors, the EvenFlow reduces the single largest labor cost in floor finish programs: application time. On a 50,000 square foot floor, the EvenFlow reduces application labor from a 3-person, 4-hour job to a 1-person, 2-hour job — a savings that compounds across every application cycle in a multi-coat program.
- Battery-powered 6-in-1 floor applicator delivers up to 30,000 square feet per hour across floors and hard surfaces
- 5-gallon built-in spray tank with 5 to 7 hours of battery runtime supports extended facility-wide application sessions
- Zero operator chemical contact design with 60-second automated self-cleaning cycle for safe and compliant operation
- Six spray modes accommodate floor finish, sealers, restorers, and disinfectants in a single applicator platform
- Fully pressurized battery system eliminates manual mopping and reduces chemical waste through precision-controlled dispensing
- Manufactured in USA for healthcare, education, transit, and industrial facility floor maintenance professionals
| Model | Pristal® EvenFlow Applicator Advanced 6-in-1 (SKU 625523) |
| Type | Battery-Powered Floor & Surface Applicator |
| Spray Tank | 5 Gallon (built-in) |
| Coverage Rate | Up to 30,000 sq ft/hr |
| Battery Runtime | 5-7 Hours |
| Spray Modes | 6 (dual-mode operation) |
| Self-Cleaning Cycle | 60-Second automated flush |
| Chemical Contact | Zero operator chemical contact |
| Applications | Floor Finish, Sealers, Restorers, Disinfectants — Healthcare, Education, Industrial |
| Made In | USA |
As a general baseline: inspect all filters and consumables before each use; clean or replace as needed. Lubricate moving parts per the owner's manual schedule. Inspect power cords, hoses, and connections for wear monthly. Schedule a full service inspection annually or every 500 operating hours, whichever comes first. Refer to the specific product documentation for model-specific intervals and requirements.
Most Mastercraft® electric machines operate on standard 120V 60Hz circuits. Current draw varies by model — check the motor specifications on the product page to ensure your circuit can handle the load. For machines drawing 10 or more amps, a dedicated circuit is recommended to prevent nuisance tripping on shared circuits.
Mastercraft® maintains parts availability for all current production machines and most legacy models. Common wear items such as pads, brushes, filters, belts, and hoses are stocked on mastercraftusa.com. For less common parts or older models, contact Mastercraft® support with your model number and serial number.
Mastercraft® machines are backed by a manufacturer's warranty against defects in materials and workmanship. Warranty terms vary by product — check your product documentation for the specific coverage period. Warranty does not cover damage from misuse, improper maintenance, use of non-OEM parts, or operation outside the rated electrical specifications.
It depends on the machine. Wet/dry vacuum models are designed for liquid pickup in appropriate indoor conditions. Floor machines, burnishers, and scrubbers are designed for indoor use on stable, level surfaces. Unless the product documentation specifically states outdoor or wet environment suitability, do not use in rain, standing water, or on sloped outdoor surfaces. Contact Mastercraft® to confirm product suitability for specialty environments.
Frequently Bought Together
