Section 179 · Put it to work by Dec 31. Not tax advice. Consult your tax advisor about Section 179 eligibility.
Section 179 for cleaning equipment: put it to work by December 31.
Business equipment placed in service in 2026 may qualify for the federal Section 179 deduction. Get a quote and review it with your tax advisor.
left to put it in service by December 31
Not tax advice. Consult your tax advisor about Section 179 eligibility.
Three points to review before you buy
Timing
Placed in service by December 31.
The date that counts is when the machine is delivered and working in your business, not the purchase date.
Treatment
A federal deduction.
The benefit depends on your business and tax situation. Your tax advisor confirms if and how it applies.
Limits
Higher limits.
Up to $2,560,000 for the 2026 tax year (IRS Rev. Proc. 2025-32).
What it could really cost after Section 179
Pick a machine. We show the price, an estimated savings range and the cost after savings. Always a range, never a single number.
- 21% federal rate (C corporation) to 37% (top 2026 individual rate)
- Full price deducted under Section 179
- Placed in service by December 31, 2026
- Excludes state taxes
*Illustrative range, not a quote. Assumes a 21% federal rate (C corporation) to 37% (top 2026 individual rate), the full price deducted under Section 179 and the machine placed in service by Dec 31, 2026. Excludes state taxes.
Equipment for the places your crews already work
Commercial machines that may qualify
20 machine lines, 35 models. Regular prices, with the estimated cost after the federal deduction at 21% to 37%.* Your tax advisor confirms what applies to your business.
Battery WAV SV280B
Large floors, no cord
SKU 611816
From $3,623 after savings*
- One operator, 28 inches per pass
- Hard floors and carpet, cord-free
WAV SV280
Large floors, corded
2 versions
From $1,744 after savings*
- One operator, 28 inches per pass
- Machine or complete kit
Mid-Size Scrubber
Self-propelled scrubbing, mid-size areas
SKU 261688
From $4,092 after savings*
- Model RA431E
- Self-propelled for easier operation
High Speed Floor Burnisher
High-gloss burnishing for commercial floors
SKU 297070
From $1,698 after savings*
- Built for daily commercial use
- Hard floor finish maintenance
FloorMac Oscillating Floor Machine
Oscillating cleaning and shine for hard floors
SKU 253111
From $852 after savings*
- Oscillating head
- Removes dirt and grime from hard floors
TW Compact Carpet Extractor
Deep carpet cleaning in a compact unit
SKU 253022
From $4,399 after savings*
- Compact footprint
- Commercial carpet extraction
Pristal® Squeegee Vacuum 16 Gal
Wet/dry recovery with a front squeegee
SKU 626309
From $1,041 after savings*
- 16-gallon wet/dry tank
- Large facilities and restoration
Pristal® EvenFlow Applicator
Battery-powered finish and sealer application
4 versions · Built in the USA
From $2,498 after savings*
- 6-in-1 floor and surface system
- Standard, 28", 36" or 48" head
Pristal® EvenFlow Micro Applicator
Gravity-fed finish and coating application
SKU 625574 · Built in the USA
From $503 after savings*
- Floor finishes, sealers and gym coatings
- Compact precision applicator
Critical HEPA Dry Vacuum
Enviromaster · 5, 7 or 9 gallon
3 versions
From $706 after savings*
- Critical HEPA filtration
- Dry pickup for sensitive environments
Critical HEPA Wet/Dry 15 Gal
Enviromaster · wet and dry pickup
2 versions
From $1,468 after savings*
- Liquids and dry debris in one machine
- Machine or complete kit
HEPA Backpack Probe 10
Enviromaster · HEPA for mobile crews
2 versions
From $655 after savings*
- Backpack format for halls, stairs and tight spaces
- Machine or complete kit
Pneumatic HEPA Backpack 4 Gal
Air-powered, stainless steel
SKU 325724
From $1,473 after savings*
- Compressed-air operation
- HEPA filtration for hazardous material pickup
Sootmaster® 652M
4.8 · 6 reviewsCommercial HVAC, oil boilers
2 versions
From $636 after savings*
- Built for soot and ash service calls
- Machine or complete kit
Sootmaster® 641M
Chimney sweep routes
2 versions
From $617 after savings*
- Compact for daily route work
- Machine or complete kit
Industrial Ash Vacuum
High-temp cooled residues, crematoriums
2 versions
From $1,102 after savings*
- 2 HP, 3-stage bypass motor
- Machine or complete kit
Drum Adapter Vacuums
High-volume debris into a 55-gallon drum
5 versions
From $755 after savings*
- Electric or air-powered
- Dry, wet/dry or HEPA dry
Compressed Air Vac Pro 15 Gal
Compressed-air dry recovery
SKU 313432
From $1,211 after savings*
- Corrosion-resistant poly tank
- For harsh industrial environments
P41535W 2 HP Wet/Dry Vacuum
Fast recovery of spills and debris
SKU 329800
From $1,288 after savings*
- 92 CFM airflow, 135" water lift
- Wet and dry pickup
Pump Out Flood Vacuum
Water removal with pump-out
SKU 431001
From $1,967 after savings*
- 20-gallon polyethylene tank
- 94 CFM airflow, 84" water lift
*Illustrative range, not a quote. Assumes a 21% federal rate (C corporation) to 37% (top 2026 individual rate), the full price deducted under Section 179 and the machine placed in service by Dec 31, 2026. Excludes state taxes.
Review your order
Adjust versions and quantities and add the parts that fit. Then request a quote to review with your tax advisor, or check out now.
Machines
Choose the machines for your order
Add parts and accessories to the same order
Quotes the same business day. Secure checkout. Ships from Mastercraft USA.
Request a Section 179 quote
Build your order above and we fill this in for you, or tell us the machines and quantities. We send the price so you can review it with your tax advisor.
- Reply the same business day
- American manufacturer since 1946
- Mix machines from any line in one quote
- Prefer to talk? (845) 565-8850
Mastercraft® is not a tax advisor and does not provide tax, legal or accounting advice. This information is for general reference only and is based on IRS Rev. Proc. 2025-32 for the 2026 tax year. Eligibility and benefits under Section 179 depend on your business. Please consult your tax advisor before making a purchase decision.
Get your quote
We reply the same business day.
Loading the quote form…
Trouble with the form? Call (845) 565-8850.
Quote first. Advisor second. Order third.
Get a quote
Pick the machine. We send the price the same business day.
Review it with your tax advisor
Bring the quote. They confirm if and how Section 179 applies to your business.
Place your order
Put the machine to work in your business by December 31.
Bring your Mastercraft quote
- Machine, model and SKU
- Price for the quantity you need
- Sent by email the same business day
And the true-cost sheet
- Price, illustrative savings range and after-tax range
- Every assumption printed next to the numbers
- Your advisor confirms if and how Section 179 applies
Before you call your advisor
Short answers. Your tax advisor has the final word on what applies to your business.
Request a quote →It can, if it's used for business and placed in service by December 31. Your tax advisor confirms the rest.
Delivered, set up and ready to work in your business, not just ordered or paid for.
Your advisor needs the machine and the price to tell you if and how it applies. We reply the same business day.
No. Mastercraft® is not a tax advisor. This page is general information for the 2026 tax year.
Section 179 is federal. Some states don't follow it. Ask your tax advisor.
Mastercraft® is not a tax advisor and does not provide tax, legal or accounting advice. This information is for general reference only and is based on IRS Rev. Proc. 2025-32 for the 2026 tax year. Eligibility and benefits under Section 179 depend on your business. Please consult your tax advisor before making a purchase decision.