Mastercraft USA
Oscillating Floor Machine FloorMac | Mastercraft®
Multi-purpose oscillating floor machine for concrete grinding, polishing, coating removal and wood sanding. Handles all hard floor surfaces.
$1,352
Fast Shipping
In Stock
· Ready to ship
13 In
CLEANING PATH
38 lbs
WEIGHT
10 In
FLOOR CLEARANCE
Oscillating
MOTION
Made in USA
Industry-Leading Warranty
80+ Years in Business
Expert Support
(845) 565-8850
Pro Tip: The oscillating motion is ideal for applying floor finish on large areas — it eliminates the lap marks that rotary applicators leave. Apply finish in thin, even coats with a clean finish pad, working in long parallel strips. Let each coat dry fully before applying the next; oscillating machines applied too aggressively on a wet coat will pull the finish. Shop 16" Pad Driver →
Oscillating Floor Machine FloorMac | Mastercraft®
The Mastercraft FloorMac oscillating floor machine uses a back-and-forth oscillating motion rather than the rotary motion of traditional single-disc floor machines — a distinction that matters for application quality and surface safety. Oscillating action distributes pad pressure evenly across the full surface, eliminating the circular streaking and uneven application common with rotary machines. On finishing work, this produces a uniform, streak-free result that rotary machines cannot match on flat surfaces. At 38 lbs and a 13-inch cleaning path with 10 inches of floor clearance, the FloorMac reaches under standard commercial furniture and fixtures without the need to move them. The multi-surface capability covers tile, hardwood, concrete, parquet, linoleum, slate, and outdoor surfaces — including walkways, patios, and pool decks. The oscillating mechanism also makes it effective for carpet pre-treatment, working cleaning solution into fiber without the lateral pulling that rotary machines cause. Made in Newburgh, NY. For facility managers running mixed-surface properties, the FloorMac replaces multiple single-purpose machines: one unit handles floor scrubbing, stripping, polishing, and carpet pre-treatment. Consolidating floor care equipment reduces storage requirements, training complexity, and capital cost.
- 1.25 HP motor at 1,450 RPM powers oscillating back-and-forth motion for even floor finish application without lap marks
- 13-inch cleaning path with 10-inch floor clearance enables access under furniture and equipment in commercial spaces
- Oscillating motion provides superior floor finish application uniformity compared to rotary floor machines
- 36-foot power cord and adjustable handle accommodate varied facility layouts and operator heights
- Suitable for tile, hardwood, concrete, parquet, linoleum, slate, and stone surfaces for multi-surface versatility
- Manufactured in USA at 38 pounds with lightweight design for single-operator use in hotels, schools, and healthcare facilities
| Model | Mastercraft® FloorMac (SKU 253111) |
| Type | Oscillating Floor Machine |
| Motor | 1.25 HP, 120V |
| Brush Speed | 1,450 RPM |
| Power Cord | 36 ft |
| Cleaning Path | 13" |
| Floor Clearance | 10" |
| Motion | Oscillating (back-and-forth) |
| Weight | 38 lbs |
| Handle | Adjustable |
| Surfaces | Tile, Hardwood, Concrete, Parquet, Linoleum, Slate, Stone |
| Applications | Floor Scrubbing, Stripping, Polishing, Coating Application |
| Made In | USA |
As a general baseline: inspect all filters and consumables before each use; clean or replace as needed. Lubricate moving parts per the owner's manual schedule. Inspect power cords, hoses, and connections for wear monthly. Schedule a full service inspection annually or every 500 operating hours, whichever comes first. Refer to the specific product documentation for model-specific intervals and requirements.
Most Mastercraft® electric machines operate on standard 120V 60Hz circuits. Current draw varies by model — check the motor specifications on the product page to ensure your circuit can handle the load. For machines drawing 10 or more amps, a dedicated circuit is recommended to prevent nuisance tripping on shared circuits.
Mastercraft® maintains parts availability for all current production machines and most legacy models. Common wear items such as pads, brushes, filters, belts, and hoses are stocked on mastercraftusa.com. For less common parts or older models, contact Mastercraft® support with your model number and serial number.
Mastercraft® machines are backed by a manufacturer's warranty against defects in materials and workmanship. Warranty terms vary by product — check your product documentation for the specific coverage period. Warranty does not cover damage from misuse, improper maintenance, use of non-OEM parts, or operation outside the rated electrical specifications.
It depends on the machine. Wet/dry vacuum models are designed for liquid pickup in appropriate indoor conditions. Floor machines, burnishers, and scrubbers are designed for indoor use on stable, level surfaces. Unless the product documentation specifically states outdoor or wet environment suitability, do not use in rain, standing water, or on sloped outdoor surfaces. Contact Mastercraft® to confirm product suitability for specialty environments.
Frequently Bought Together
