PRO CHOICE
Mastercraft USA
16" Absolute HEPA Filter with Gasket | INFILTRATOR®
Sealed 16" absolute HEPA filter with gasket for asbestos and lead abatement vacuums. Prevents bypass — zero hazardous dust escapes the system.
$342
Fast Shipping
In Stock
· Ready to ship
Made in USA
Industry-Leading Warranty
80+ Years in Business
Expert Support
(845) 565-8850
16" Absolute HEPA Filter with Gasket | INFILTRATOR®
The Infiltrator® 16" absolute HEPA filter with gasket is the primary replacement HEPA filter for the Enviromaster P-series vacuum line — the HOT DOP certified filter that maintains the vacuum's OSHA 1926.1101 compliance for asbestos, lead, and mold remediation dry pickup. Certified at 100 CFM for 99.97% capture at 0.3 microns with a gasketed seal that prevents air bypass around the filter housing. Fits Enviromaster P-series (5, 7, 9, and 15-gallon models) and Mastercraft drum adapters using the 16-inch filter specification. The highest-value consumable in the Enviromaster maintenance program — a degraded or bypassed HEPA filter voids compliance on active abatement sites. Maintain a minimum 1–2 spare filters per active machine for immediate replacement when suction loss is detected.
- 16-inch absolute HEPA filter with gasket certified at 99.97% efficiency at 0.3 microns for critical filtration compliance
- Metal casing with integrated gasket provides airtight sealed fit in compatible 16-inch filter housing vacuum models
- Micro-fibered glass paper media captures asbestos, lead dust, mold spores, and fine hazardous particulate
- Compatible with Enviromaster 15-gallon poly wet/dry vacuum (P41512WAF) and other 16-inch housing Mastercraft vacuums
- Replace filter when airflow decreases noticeably or after 30 to 50 hours of use in high-exposure environments
- Never wash or clean HEPA filter media as doing so destroys certified filtration rating and voids compliance
Mastercraft® accessories are sized by inlet diameter. Most Enviromaster® and SootMaster® vacuums use 1.5" fittings; the Probe 10 Backpack uses 1.25" fittings. Check the inlet diameter of your vacuum before ordering. Product descriptions on mastercraftusa.com include compatibility notes, and Mastercraft® support can confirm fitment for your specific model.
Mastercraft® accessories are designed for use with Mastercraft® and Enviromaster® vacuums. While standard-sized fittings may physically fit other brands, Mastercraft® cannot guarantee performance or airtight seal integrity with third-party equipment. For OSHA-regulated work, any accessory that compromises the sealed filtration path will affect compliance.
Crush-proof vinyl hoses maintain their shape and internal diameter even when kinked, stepped on, or run over by equipment. On active job sites — especially remediation, restoration, and industrial environments — this prevents suction loss and motor stress caused by collapsed hoses. Standard hoses are lighter and lower cost, suited for controlled, low-traffic environments.
Mastercraft® pad drivers are designed for Mastercraft® floor machines. Compatibility with third-party machines depends on the drive shaft type and diameter. Contact Mastercraft® support with your machine model details to confirm fitment before ordering.
Mastercraft® accessories are covered by a standard manufacturer's warranty against defects in materials and workmanship. Consumable items such as filter bags and replacement pads are not covered once opened and used. Contact Mastercraft® USA through the support contact on your invoice for return or exchange inquiries.
Frequently Bought Together
