PRO CHOICE
Mastercraft USA
14" Absolute HEPA Filter with Gasket | INFILTRATOR®
Sealed 14" absolute HEPA filter with gasket. Prevents bypass for OSHA-compliant critical filtration in asbestos, lead and mold remediation vacuums.
$340
Fast Shipping
In Stock
· Ready to ship
Made in USA
Industry-Leading Warranty
80+ Years in Business
Expert Support
(845) 565-8850
14" Absolute HEPA Filter with Gasket | INFILTRATOR®
The Infiltrator® 14" absolute HEPA filter with gasket is HOT DOP certified at 100 CFM for 99.97% capture of particles at 0.3 microns — the filtration standard for OSHA-compliant asbestos and lead abatement vacuuming. The gasket seal prevents the air bypass that occurs with non-gasketed filters, ensuring all exhausted air passes through the HEPA media and exits clean. Fits Sootmaster 641M and 652M, and Mastercraft vacuum models using the 14-inch filter specification. The primary HEPA filter for the Sootmaster line — replace when suction loss occurs or per the service interval. Use in combination with 14" intermediate filters as a pre-filter stage to extend HEPA filter service life on high-particulate jobs.
- 14-inch absolute HEPA filter with gasket certified at 99.97% efficiency at 0.3 microns for critical filtration compliance
- Metal casing with integrated gasket provides airtight sealed fit in compatible 14-inch filter housing vacuum models
- Micro-fibered glass paper media captures asbestos, lead dust, mold spores, and fine hazardous particulate
- Compatible with Mastercraft vacuums using 14-inch HEPA filter housing configurations
- Replace filter when airflow decreases noticeably or after 30 to 50 hours of use in high-exposure environments
- Never wash or clean HEPA filter media as doing so destroys certified filtration rating and voids compliance
Mastercraft® accessories are sized by inlet diameter. Most Enviromaster® and SootMaster® vacuums use 1.5" fittings; the Probe 10 Backpack uses 1.25" fittings. Check the inlet diameter of your vacuum before ordering. Product descriptions on mastercraftusa.com include compatibility notes, and Mastercraft® support can confirm fitment for your specific model.
Mastercraft® accessories are designed for use with Mastercraft® and Enviromaster® vacuums. While standard-sized fittings may physically fit other brands, Mastercraft® cannot guarantee performance or airtight seal integrity with third-party equipment. For OSHA-regulated work, any accessory that compromises the sealed filtration path will affect compliance.
Crush-proof vinyl hoses maintain their shape and internal diameter even when kinked, stepped on, or run over by equipment. On active job sites — especially remediation, restoration, and industrial environments — this prevents suction loss and motor stress caused by collapsed hoses. Standard hoses are lighter and lower cost, suited for controlled, low-traffic environments.
Mastercraft® pad drivers are designed for Mastercraft® floor machines. Compatibility with third-party machines depends on the drive shaft type and diameter. Contact Mastercraft® support with your machine model details to confirm fitment before ordering.
Mastercraft® accessories are covered by a standard manufacturer's warranty against defects in materials and workmanship. Consumable items such as filter bags and replacement pads are not covered once opened and used. Contact Mastercraft® USA through the support contact on your invoice for return or exchange inquiries.
Frequently Bought Together
