Mold Remediation Cleanup, HEPA Filtered
Cutting out mold-damaged drywall, insulation and trim leaves fine dust and debris in the work area, and after a leak or a flood some of it is still wet. Mastercraft® Enviromaster Series Critical HEPA vacuums pick it up and pass the exhaust air through an INFILTRATOR® HEPA filter with Critical Filtration, rated 99.97% at 0.3 microns.
Order direct by card, or ask for a written quote. Made in the USA.
The Cleanup After the Tear-Out
Mold Removal Leaves Dust, and Often Water
Cutting out mold-damaged material fills the work area with fine dust and debris. A standard shop vacuum's filter is not rated for fine particles, so much of what it picks up can pass through its exhaust. A HEPA vacuum is built to hold it in the machine.
Fine Particles Pass Through Ordinary Filters
Dust from cut-out drywall, insulation and framing is fine enough to pass through a standard vacuum filter and back into the room. An INFILTRATOR® HEPA filter with Critical Filtration, rated 99.97% at 0.3 microns, captures particles down to that size before the air leaves the machine.
Most Mold Jobs Start With Water
Mold usually follows a leak or a flood, so some areas are still damp when the crew starts. The 15 gallon wet/dry picks up wet and dry material in the same work area, and a float shuts off suction when the tank is full. The 5, 7 and 9 gallon are for dry pickup.
Your Plan Sets the Method. The Vacuum Does the Pickup.
How mold remediation is done, from containment to final cleaning, is set by your work plan, your protocol and your project's requirements. The vacuum's job is the pickup: dust and debris go into the tank, and the exhaust air passes through an INFILTRATOR® HEPA filter rated 99.97% at 0.3 microns.
Where It Works
From the Basement to the Attic
Tank vacuums for basements, rooms and hallways, and the Probe 10 backpack for attics, ceilings and tight spaces. Every one passes its exhaust through a HEPA filter rated 99.97% at 0.3 microns.
The Equipment
Five Models. One HEPA Rating.
The Enviromaster Series, small to large: the Probe 10 backpack for attics and overhead work, three dry tank vacuums (5, 7 and 9 gallon) for dust and dry debris, and a 15 gallon wet/dry for areas that are still damp after a water loss. The tank vacuums pass their exhaust through an INFILTRATOR® HEPA filter with Critical Filtration, rated 99.97% at 0.3 microns, and the Probe 10's sealed INFILTRATOR® HEPA cartridge carries the same 99.97% rating. Choose by the job, the space and whether moisture is left.
Which one fits your jobs?
Choose the Probe 10 Backpack if…
the work is in attics, on ceilings and overhead surfaces, or in spaces a tank vacuum cannot follow the operator into.
Choose the 5 Gallon Dry if…
your crew works in bathrooms, closets and small rooms and carries the machine between floors.
Choose the 7 Gallon Dry if…
you are clearing dry rooms and hallways and want a mid-size tank.
Choose the 9 Gallon Dry if…
you are clearing basements and larger rooms that are dry and want fewer stops to empty the tank.
Choose the 15 Gallon Wet/Dry if…
the job follows a leak or a flood, some areas are still damp, and you want one machine for wet and dry pickup.
HEPA Backpack Vacuum Cleaner Probe 10 | Enviromaster Series
Worn on the back, about 32 lbs loaded, for stairwells, ceilings and tight spaces.
- Model: Probe 10
- Motor: 1,188 W
- Airflow: 100 to 130 CFM
- Water Lift: 100 in.
- Tank: 10 quart (2.5 gallon) backpack
- Filtration: Sealed INFILTRATOR® HEPA cartridge, 99.97% at 0.3 microns (Hot DOP)
- SKU: 601268EM1
Critical HEPA Dry Vacuum 5 Gallon | Enviromaster Series
Compact dry vacuum for tight spaces.
- Model: P4511HVAF-R
- Motor: 7.5 amp
- Airflow: 94 CFM
- Water Lift: 84 in.
- Tank: 5 gallon polyethylene
- Filtration: INFILTRATOR® HEPA Critical Filtration, 99.97% at 0.3 microns
- SKU: 257915
Critical HEPA Dry Vacuum 7 Gallon | Enviromaster Series
Dry pickup of dust and debris, mid-size tank.
- Model: P4710HVAF
- Motor: 1.3 HP bypass
- Airflow: 94 CFM
- Water Lift: 84 in.
- Tank: 7 gallon polyethylene
- Filtration: INFILTRATOR® HEPA Critical Filtration, 99.97% at 0.3 microns
- SKU: 369888
Critical HEPA Dry Vacuum 9 Gallon | Enviromaster Series
Larger tank, fewer stops to empty.
- Model: P4911HVAF-R
- Motor: 1.3 HP bypass
- Airflow: 94 CFM
- Water Lift: 84 in.
- Tank: 9 gallon polyethylene
- Filtration: INFILTRATOR® HEPA Critical Filtration, 99.97% at 0.3 microns
- SKU: 262617
Critical HEPA Wet Dry Vacuum 15 Gallon | Enviromaster Series
One machine for damp residue and dry debris.
- Model: P41512WAF
- Motor: 2 HP bypass
- Airflow: 112 CFM
- Water Lift: 106 in.
- Tank: 15 gallon polyethylene
- Filtration: INFILTRATOR® HEPA Critical Filtration, 99.97% at 0.3 microns
- SKU: 617938
How to Buy
Two Ways to Buy. Same Machine.
Pay by card here, or get a written quote first. Either way you buy direct from Mastercraft®.
Pick Your Model
Choose by the job: the Probe 10 backpack for attics and overhead work, the 5, 7 or 9 gallon for dry pickup, the 15 gallon for areas that are still damp. Call (845) 565-8850 if you want help choosing.
Pay by Card or Request a Quote
Add the model to the cart and pay by card, or use the quote form for a written quote on Mastercraft® letterhead.
Ships Direct
Orders ship direct from Mastercraft®, and the tank vacuums ship from our Newburgh, New York facility. If you have a date to meet, call before you order and we will confirm the lead time.
Questions
Before You Order
What mold remediation contractors ask before they order. A person answers at (845) 565-8850.
Can I pay by card?
Yes. Add your model to the cart and pay at checkout. If you need a quote first, use the quote form or call (845) 565-8850.
Can I get a written quote?
Yes. Use the quote form on this page or call (845) 565-8850. The quote lists the model, unit price and shipping on Mastercraft® letterhead.
What HEPA rating do these vacuums carry?
Each Enviromaster Series tank vacuum passes its exhaust air through an INFILTRATOR® Type A HEPA filter with Critical Filtration, rated 99.97% efficiency at 0.3 microns by the Hot DOP method, and the INFILTRATOR® HEPA filter bags ahead of it are rated 95% at 0.3 microns. The Probe 10 backpack ships with a sealed INFILTRATOR® HEPA cartridge, also rated 99.97% at 0.3 microns by the Hot DOP method. That is the rating we state for this equipment. Call (845) 565-8850 if your office needs product documentation.
Is the HEPA system sealed?
On the 5, 7, 9 and 15 gallon, yes: they carry a sealed Critical HEPA filter, so the exhaust air goes through the filter. The Probe 10 backpack ships with a sealed INFILTRATOR® HEPA cartridge, rated 99.97% at 0.3 microns by the Hot DOP method.
Can I use it on mold remediation jobs?
It picks up the dust and debris your crew removes, and passes the exhaust air through an INFILTRATOR® HEPA filter rated 99.97% at 0.3 microns. How the remediation itself is done, from containment to final cleaning, is set by your work plan, your protocol and your project's requirements.
Which dry model should I choose?
All three dry models move 94 CFM with 84 inches of water lift. The 7 and 9 gallon use a 1.3 HP bypass motor; the 5 gallon uses a 7.5 amp motor and is the most compact. Choose by tank size: 5 gallon for small rooms and stairwells, 7 gallon for rooms and corridors, 9 gallon for larger rooms. For attics, ceilings and overhead surfaces, the Probe 10 backpack stays on the operator's back.
Which model can I use where the area is still wet?
The 15 gallon wet/dry. It is rated for wet and dry pickup, moves 112 CFM with 106 inches of water lift, and has a float that shuts off suction when the tank is full. The 5, 7 and 9 gallon are built for dry pickup, and picking up liquid with them damages the motor and voids the warranty. The Probe 10 backpack is built for dry pickup too.
Are they made in the USA?
Every machine on this page is made in the USA. The tank vacuums are built by Mastercraft® in Newburgh, New York. If you need country of origin documentation, call (845) 565-8850.
What warranty comes with them?
Each model carries a Mastercraft® warranty. Call (845) 565-8850 for the terms on your model. Replacement INFILTRATOR® HEPA filters and filter bags are sold direct from Mastercraft®.
Can I order replacement HEPA filters and bags with the machine?
Yes. The Order section below lists the INFILTRATOR® HEPA filter, pre-filters and filter bags that fit each model you choose, so you can add them to the same order. Call (845) 565-8850 if you are not sure which part fits a machine you already own.
Order
Order Direct From Newburgh, NY
Choose your model and pay by card at checkout, or request a quote below.
Buy from the manufacturer
Choose your models and quantities
Probe 10 Backpack
Worn on the back, about 32 lbs loaded, for stairwells, ceilings and tight spaces.
$1,040
5 Gallon Dry
Compact dry vacuum for tight spaces.
$1,120
7 Gallon Dry
Dry pickup of dust and debris, mid-size tank.
$1,199
9 Gallon Dry
Larger tank, fewer stops to empty.
$1,209
15 Gallon Wet/Dry
One machine for damp residue and dry debris.
$2,330
Add parts to the same order
Order Summary
Purchase Order
Need a Written Quote?
Many contractors need a written quote or buy on a purchase order. Send the details and a person replies the same business day.
Ready When You Are
HEPA Cleanup Equipment for Mold Remediation Crews
Order by card or ask for a written quote, direct from Mastercraft® in Newburgh, NY. A person answers at (845) 565-8850.
Five models · INFILTRATOR® HEPA filtration · Made in the USA