PRO CHOICE
Mastercraft USA
Applicateur EvenFlow 6-en-1 avancé pour sols et surfaces avec tête de 91 cm | Pristal®
Battery-powered 6-in-1 floor applicator with 36" head. Applies coatings and finishes across mid-size commercial floors with consistent, even pressure.
$5,125
Fast Shipping
In Stock
· Ready to ship
30K SF/Hr
COVERAGE
5 Gal
SPRAY TANK
36 In
HEAD WIDTH
5–7 Hr
BATTERY
Choose Your Size & Type
PRO CHOICE
Applicateur EvenFlow, système avancé d'application 6 en 1 pour sols et surfaces | Pristal®
$3,965
Applicateur EvenFlow 6-en-1 avancé pour sols et surfaces avec tête de 71 cm | Pristal®
$4,890
You're viewing
Applicateur EvenFlow 6-en-1 avancé pour sols et surfaces avec tête de 91 cm | Pristal®
$5,125
Applicateur EvenFlow 6-en-1 avancé pour sols et surfaces avec tête de 48 po | Pristal®
$5,265
Made in USA
Industry-Leading Warranty
80+ Years in Business
Expert Support
(845) 565-8850
Pro Tip: On very large open floors, start your application pattern at the far end from the exit and work back toward the door — you never walk on applied finish. With 5–7 hours of battery and a 5-gallon tank on a 36-inch head, plan a tank refill stop at the midpoint of any floor over 30,000 square feet to maintain continuous chemical pressure. Shop Squeegee Blades →
Applicateur EvenFlow 6-en-1 avancé pour sols et surfaces avec tête de 91 cm | Pristal®
The Pristal EvenFlow Applicator with 36-inch head assembly is the recommended configuration for large open floor plans — airport concourses, convention centers, gymnasium floors, and large retail spaces — where maximum coverage width translates directly to faster completion times and fewer passes across the floor. The 36-inch head covers 25% more area per pass than the 28-inch configuration, reducing total application time proportionally on large square footage. All core EvenFlow specifications apply: up to 30,000 square feet per hour coverage, 5-gallon spray tank with direct-draw from chemical containers, 5–7 hour battery runtime, 6 application modes, and 60-second self-cleaning between product changes. At 36 inches, the head assembly fits comfortably through double-door commercial entries (typically 60+ inches) that are standard in institutional and large commercial buildings. Made in USA. For facility service contractors managing large-square-footage accounts, the 36-inch assembly is the most productive configuration that remains practical across the full range of large commercial environments. The coverage rate at this width provides measurable labor savings on accounts over 20,000 square feet per application session.
- Battery-powered 6-in-1 applicator with 36-inch head delivers up to 30,000 square feet per hour coverage
- 5-gallon built-in spray tank with 5 to 7 hours of battery runtime supports extended facility-wide application sessions
- 36-inch application head maximizes single-pass coverage for large open commercial floor areas and corridors
- Zero operator chemical contact design with 60-second automated self-cleaning cycle for safe and compliant operation
- Six spray modes accommodate floor finish, sealers, restorers, and disinfectants in a single applicator platform
- Manufactured in USA for healthcare, education, transit, and industrial facility floor maintenance professionals
| Model | Pristal® EvenFlow Applicator Advanced 6-in-1 with 36" Head (SKU 625523) |
| Type | Battery-Powered Floor & Surface Applicator |
| Head Width | 36" |
| Spray Tank | 5 Gallon (built-in) |
| Coverage Rate | Up to 30,000 sq ft/hr |
| Battery Runtime | 5-7 Hours |
| Spray Modes | 6 (dual-mode operation) |
| Self-Cleaning Cycle | 60-Second automated flush |
| Chemical Contact | Zero operator chemical contact |
| Applications | Floor Finish, Sealers, Restorers, Disinfectants — Healthcare, Education, Industrial |
| Made In | USA |
As a general baseline: inspect all filters and consumables before each use; clean or replace as needed. Lubricate moving parts per the owner's manual schedule. Inspect power cords, hoses, and connections for wear monthly. Schedule a full service inspection annually or every 500 operating hours, whichever comes first. Refer to the specific product documentation for model-specific intervals and requirements.
Most Mastercraft® electric machines operate on standard 120V 60Hz circuits. Current draw varies by model — check the motor specifications on the product page to ensure your circuit can handle the load. For machines drawing 10 or more amps, a dedicated circuit is recommended to prevent nuisance tripping on shared circuits.
Mastercraft® maintains parts availability for all current production machines and most legacy models. Common wear items such as pads, brushes, filters, belts, and hoses are stocked on mastercraftusa.com. For less common parts or older models, contact Mastercraft® support with your model number and serial number.
Mastercraft® machines are backed by a manufacturer's warranty against defects in materials and workmanship. Warranty terms vary by product — check your product documentation for the specific coverage period. Warranty does not cover damage from misuse, improper maintenance, use of non-OEM parts, or operation outside the rated electrical specifications.
It depends on the machine. Wet/dry vacuum models are designed for liquid pickup in appropriate indoor conditions. Floor machines, burnishers, and scrubbers are designed for indoor use on stable, level surfaces. Unless the product documentation specifically states outdoor or wet environment suitability, do not use in rain, standing water, or on sloped outdoor surfaces. Contact Mastercraft® to confirm product suitability for specialty environments.
Frequently Bought Together
