Public Works · Emergency Management · School Facilities · VA and Federal Facilities

Flood Water Out, Straight to the Drain

The Mastercraft® Pump Out Flood vacuum picks up standing water at 94 CFM and 84 inches of waterlift. Its built-in 3/4 HP stainless steel pump sends the water through a hose to a drain at up to 4,000 gallons an hour while the machine keeps running.

Pay with a government purchase card, or ask for a quote on letterhead. Registered on SAM.gov. Made in Newburgh, NY.

Flood Water Out, Straight to the Drain
Purchase Card Ready
4,000 gallons an hour, pump
84 in. waterlift
Made in USA Newburgh, NY · since 1946

Configure Your Order

Set the quantity and add the spare hoses and floor tools you want. Pay by government purchase card at checkout, or request a quote on letterhead below.

Direct

Buy from the manufacturer

Choose your models and quantities

Pump Out Flood Wet pickup at 94 CFM and 84 in. of waterlift, with a built-in pump that discharges up to 4,000 GPH. $3,122

Add parts to the same order

Order Summary


Total —
Pay by government purchase card at checkout, or request a quote on letterhead. It ships from Newburgh, NY; call (845) 565⁠-⁠8850 before you order if you have a date to meet.

A Full Tank Stops the Work

A standard wet/dry vacuum stops when its tank is full, and someone has to carry the water out and dump it. This machine pumps the water out as the tank fills, so the operator keeps extracting.

Pump-Out

The Tank Empties Through a Hose

A 3/4 HP pump with a 304 stainless steel casing, housing and impeller is built into the machine. An adjustable float switch runs it as the 20 gallon tank fills, and the water leaves through a 2 in. side discharge to a drain.

4,000 GPH pump flow, up to 26 ft of head
Standing Water

Power Protection on a Wet Floor

The machine ships with a 50 ft in-line GFCI safety cord that cuts power automatically if the electrical connection is compromised.

50 ft in-line GFCI safety cord, UL/cUL listed
Buying

Buy It the Way Your Agency Buys

Pay by government purchase card at checkout, or ask for a quote on Mastercraft® letterhead if your office needs paperwork first. We are registered on SAM.gov as Onfloor Technologies LLC: UEI GT6MK2BMBHB8, CAGE 8LLL2.

$3,122 one machine, purchase card ready

Mastercraft® Pump Out Flood Vacuum

A 1.3 HP bypass motor for the pickup, a 3/4 HP stainless steel pump for the discharge, and a 20 gallon tank between them.

Where government crews use it

Basements and mechanical rooms

In city halls, libraries, schools and federal buildings: water around boilers, water heaters and pumps goes to the nearest floor drain while the operator keeps extracting.

Garages and vehicle bays

Public works garages, vehicle bays and loading areas: standing water on concrete floors, picked up with the 14" metal squeegee tool, with the 50 ft cord for reach.

Flood recovery and disaster cleanup

The jobs the machine is made for: wet pickup only, with the 20 gallon tank pumping out as it fills.

Every unit includes: 15' Vinyl CrushProof Hose · 50' Vinyl CrushProof Hose · 1.5" Swivel Connector · 1.5" Steel Double Bend Vacuum Wand · 14" Metal Squeegee Tool · 1.5" Aluminum Gulper Nozzle · Strainer sack (mesh bag) to protect the pump from debris · 50 ft in-line GFCI safety cord
Pump Out Flood - Water Vacuum Cleaner | Mastercraft®
Made in USA · Purchase Card Ready

Pump Out Flood - Water Vacuum Cleaner | Mastercraft®

Wet pickup at 94 CFM and 84 in. of waterlift, with a built-in pump that discharges up to 4,000 GPH.

  • Model: Pump Out Flood Vacuum
  • SKU: 431001
  • Motor: 1.3 HP bypass, 120V
  • Airflow: 94 CFM
  • Waterlift: 84 in.
  • Tank: 20 gallon polyethylene
  • Pump: 3/4 HP, 115V, 304 stainless steel
  • Pump Flow: Up to 4,000 GPH
  • Pump Max Head: 26 ft
  • Discharge: 2 in. NPT, side
  • Pump Switch: Adjustable float switch
  • Solids Handling: 1.5 in.
  • Safety Cord: 50 ft in-line GFCI, automatic power shut-off, UL/cUL listed
  • Pickup: Wet only
  • Height: 36 in.
  • Made In: Newburgh, NY, USA
$3,122
Add the Pump Out Flood Vacuum to Cart

Two Ways to Buy. Same Machine.

Pay by purchase card here, or get a quote your procurement office can process. Either way you buy direct from Mastercraft®.

1

Set Your Order

Choose the quantity and any spare hoses or floor tools. Call (845) 565⁠-⁠8850 if you want help.

2

Pay by Card or Request a Quote

Pay with your government purchase card at checkout, or use the quote form for a quote on letterhead.

3

Ships Direct

Orders ship direct from Mastercraft® in Newburgh, New York. If you have a date to meet, call before you order and we will confirm the lead time.

Before You Order

What government buyers ask before a purchase card order or a PO. A person answers at (845) 565⁠-⁠8850.

Are you registered on SAM.gov?

Yes. We are registered as Onfloor Technologies LLC, UEI GT6MK2BMBHB8, CAGE 8LLL2. Your procurement office can look up the record on SAM.gov by the UEI.

Can I pay with a government purchase card?

Yes. Add the machine to the cart and pay with the card at checkout. If your office needs a quote first, use the quote form or call (845) 565⁠-⁠8850.

Can I get a quote on letterhead?

Yes. Use the quote form on this page or call (845) 565⁠-⁠8850. The quote lists the machine, unit price and shipping on Mastercraft® letterhead.

How is it different from a wet/dry shop vacuum?

A wet/dry vacuum stops when its tank is full and has to be emptied by hand. This machine has a built-in pump with an adjustable float switch: as the 20 gallon tank fills, the pump sends the water through a hose to a drain at up to 4,000 gallons an hour, and the machine keeps running.

Where does the water go?

Out a 2 in. side discharge, through a hose to a drain. Route the discharge hose to the nearest floor drain before you start, and keep the pump's intake screen clear; the strainer sack that ships with the machine protects the pump from debris. Call (845) 565⁠-⁠8850 if you want help setting up the discharge line.

Can it pick up dry debris?

No. It is built for wet pickup only. For the dust and dry debris once the water is out, call (845) 565⁠-⁠8850 and we will help you choose a dry vacuum.

What comes with it?

A 15' and a 50' vinyl CrushProof hose, a 1.5" swivel connector, a 1.5" steel double bend wand, a 14" metal squeegee tool, a 1.5" aluminum gulper nozzle, a strainer sack that protects the pump from debris, and the 50 ft in-line GFCI safety cord.

What power does it need?

A standard 120V outlet. The vacuum runs on a 1.3 HP bypass motor at 120V and the pump on a 3/4 HP, 115V single-phase motor, through the 50 ft in-line GFCI safety cord.

Is it made in the USA?

Yes. Mastercraft® builds the Pump Out Flood vacuum in Newburgh, New York. Whether a purchase meets the Buy American Act is your contracting office's call; if it needs country of origin documentation, call (845) 565⁠-⁠8850.

What warranty comes with it?

It carries a Mastercraft® warranty. Call (845) 565⁠-⁠8850 for the terms. Spare hoses and floor tools are sold direct from Mastercraft®.

How soon does it ship?

It ships from Newburgh, NY. If you have a date to meet, call (845) 565⁠-⁠8850 before you order and we will confirm the lead time.

Need a Quote on Letterhead?

Most facilities buy on a purchase order. Send the details and a person replies the same business day.

Flood Water Out, Bought Your Way

Purchase card or quote on letterhead, direct from Mastercraft® in Newburgh, NY. A person answers at (845) 565⁠-⁠8850.

SAM.gov: Onfloor Technologies LLC · UEI GT6MK2BMBHB8 · CAGE 8LLL2